Best Boss Subwoofers

As an Amazon Associate I earn from qualifying purchases.

Are you looking for the Best Boss Subwoofers? Congratulations! You have landed in the right place. Because we try to cover almost every human need. Here we have our well-researched and reviewed article on top 10 Best Boss Subwoofers.

Take your time and read our content. You will find a table listing the top 10 products among all the variants of your desired one. A buying guide is also available to check the facts. So be sure to choose the best one, though we believe any one of them will fulfill your needs.

Comparison Chart: Best Boss Subwoofers in 2022

Last update on 2022-06-25 / Affiliate links / Images from Amazon Product Advertising API

Best Boss Subwoofers Reviews in 2022

SaleNo. 1
BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space
  • Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
  • Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
  • Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
No. 2
BOSS Audio Systems BASS10 Amplified Car Subwoofer - Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, for Vehicles Needing Bass with Limited Space, Remote Subwoofer Control
  • Space Saver - If you are tight on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options
  • Pulse Width Modulated - PWM simplifies power supplies. It controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. Efficiency. Increased reliability
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BASS10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BASS10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
No. 3
BOSS Audio Systems CUBE10 Car Subwoofer and Amp Package – Built-in Amplifier, 10 Inch Subwoofer with Passive Radiator, Remote Subwoofer Control
  • Built-in Amplifier - A built-in 600 Max watt amplifier powers the 10” subwoofer
  • Passive Radiator – A driver unit that has its motor structure (magnet) removed, becomes a passive diaphragm. As a result, there is no Chuffing that you would generally get with a ported box, thus enriching the BASS & making the system more linear
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the CUBE10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Phase Control - Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up “out of phase”
No. 4
BOSS Audio 12" 3200W 4-Ohm SVC Car Stereo Subwoofer Set, Pair | P12SVC
  • Boss P12SVC 12" 1600W Car Subwoofer (Pair)
  • 1600W Max (3200 Watt per Pair)
  • 800W RMS (1600 Watt per Pair)
  • Bytul rubber
  • Polypropylene Cone
SaleNo. 5
BOSS Audio Systems PF2200 Phantom 2200 Watt, 4 Channel, 2 4 Ohm Stable Class AB, Full Range, Bridgeable, Mosfet Car Amplifier with Remote Subwoofer Control
  • 550 W MAX Power @ 2 Ohm x 4 Channels
  • 275 W MAX Power @ 4 Ohm x 4 Channels
  • 1100 W MAX Bridged Power @ 4 Ohm x 2 Channels
  • Full-Range, Class A / B Topology, MOSFET Power Supply
  • Low and High Level Inputs, Variable Filter, Variable Bass Boost
No. 6
BOSS Audio Systems BRRF46 Reflex 1000 Watt, 46 Inch , Bluetooth, Amplified, Overhead Speaker System, Off Road ATV UTV, 4 6.5 Inch Speakers, 1 8 Inch Subwoofer, IPX5 RateD
  • Wired Bluetooth Multifunction Controller (Stream and control music and apps like Spotify / Pandora wirelessly)
  • Controller Features: IPX5 Rated, USB Charging (1A), 3.5mm Aux-In, Illuminated Controls, Dome Light Control, Multi-Angle Clamp System Features Surface / Flush / Cage Mounting (Fits Bars With 1-1 / 2", 1-3 / 4", 2")
  • Overhead Speaker System Features: Fully Marinized, All-Terrain, IPX5 Rated (Weatherproof / Dustproof), Built-in Full-Range Class D Amplifier
  • Custom High-Strength Impact Resistant ABS Enclosure, 2V Pre-Amp Output, Connectivity for Multiple RIOT / REFLEX Systems
  • Compatible With Audio Output of iPod / iPhone / Smartphones / MP3 Players, Built-in LED Dome Lights
No. 7
2 BOSS P106DVC 10" 4200W Car Subwoofers + Ported Box+ 2-Ch Amp + 8 Gauge Amp Kit
  • Subwoofers:**
  • NEW BOSS P106DVC 10" 4200 Watt Car Subwoofers (Pair)
  • 2100 Watt MAX (4200 Watt per pair)
  • 1050 Watt RMS (2100 Watt per pair)
  • DUAL 4 Ohm Voice Coils
No. 8
BOSS AUDIO Phantom P106DVC 10" 4200W DVC Car Subwoofers Power Subs PAIR
  • NEW BOSS P106DVC 10" 4200 Watt Car Subwoofers (Pair)
  • 2100 Watt MAX (4200 Watt PAIR)
  • 1050 Watt RMS (2100 Watt PAIR)
  • DUAL 4 Ohm Voice Coils
  • Poly Injected Cone
SaleNo. 9
BOSS Audio Systems BASS8 8 Inch Under Seat Powered Car Subwoofer – 800 High Output, Low Profile, Built in Amplifier, for Truck, Boxes and Enclosures, Remote Subwoofer Control
  • Space Saver - If you are tight on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options
  • Pulse Width Modulated - PWM simplifies power supplies. It controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. Efficiency. Increased reliability
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BASS8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BASS8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
No. 10
BOSS Audio Systems Elite SLIM10 Amplified Car Subwoofer - Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, for Vehicles Needing Bass with Limited Space
  • Space Saver - If you are tight on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options
  • Pulse Width Modulated - PWM simplifies power supplies. It controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. Efficiency. Increased reliability
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the SLIM10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the SLIM10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers

Last update on 2022-06-25 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment