Best Dual Nozzle 3D Printers

As an Amazon Associate I earn from qualifying purchases.

Are you looking for the Best Dual Nozzle 3D Printers? Congratulations! You have landed in the right place. Because we try to cover almost every human need. Here we have our well-researched and reviewed article on top 10 Best Dual Nozzle 3D Printers.

Take your time and read our content. You will find a table listing the top 10 products among all the variants of your desired one. A buying guide is also available to check the facts. So be sure to choose the best one, though we believe any one of them will fulfill your needs.

Comparison Chart: Best Dual Nozzle 3D Printers in 2022

Last update on 2022-06-22 / Affiliate links / Images from Amazon Product Advertising API

Best Dual Nozzle 3D Printers Reviews in 2022

No. 1
FlashForge 3D Printer Creator Pro2, Independent Dual Extruder W/2 Spools, Metal Frame Structure, Acrylic Covers, Optimized Build Platform, Works with ABS and PLA
  • 【Independent dual extruder】Double efficiency of the mirror printing. Creator Pro2 make it come true that more complicated prints can be printed perfectly
  • 【Heating bed】 Rapid steady heating prevent model warping much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG,TPU etc
  • 【Anti-scrape Design】Avoid scrap in the process of printing to get better printed results
  • 【Out of box】Creator Pro is suitable for industrial design,tool design,architecture designer,mechanical designer etc
  • 【What you get】Flashforge 3d printer Creator Pro2 12 months warranty, lifetime technical assistance and 24 hours professional customer service
No. 2
LNL - Tenlog TL-D3 Pro Dual Extruder 3D Printer - 300 Degree High Temperature Nozzle,Silent Mainboards TMC2209 Drive,600W Power Supply,Support PVA TPU ABS PLA Nylon,11.8''x11.8''x13.8''…
  • 💥 EACH MACHINE Has Been Fully Tested at Our U.S. Based Warehouse to eliminate the chance of damage during overseas transit. This ensures you’ll spend more time printing and less time troubleshooting. If you do have a problem, our full time regional staff will always be here to help.
  • 【Independent Dual Extruder Design】Our TL-D3 Pro dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual material/duplication/mirror mode. With dual material printing mode, you can get two color models. Choose duplication or mirror mode, you can get two models of the same color or different colors.
  • 【Upgrade Borosilicate Glass Bed】Upgraded borosilicate glass bed enables prints to adhere better without warping. After the bed cools, models will pop-off with little to no resistance, leaving a smooth finish.
  • 【Self-Developed Silent Motherboard 】The TL-D3 Pro built-in self-developed silent motherboard TMC2209 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing, and low decibel operation.
  • 【Metal Copper Brush】 Our new copper brush can wipe off additional filament before and during printing, this will result in significantly less stringing and artifacts.
SaleNo. 3
Hardened Steel Nozzle 0.4 mm/ 1.75 mm 3D Printer MK8 Nozzles Tool High Temperature Wear Resistant Compatible with Makerbot, Creality CR-10 All Metal Hotend, Ender 3/ Ender3 pro, Prusa i3 (5 Pieces)
  • Durable material: MK8 extruder nozzles are made of hardened tool steel, good abrasion resistance, heat resistance and corrosion resistance, sturdy construction makes them durable to serve you for long time, suitable for 3D printing at high temperature
  • Good performance: this hardened tool steel nozzle has higher toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can print filaments of carbon fiber, fiberglass, etc.
  • High precision: the inner wall of the MK8 nozzles is smooth and has no burrs, the viscosity coefficient is small, extruder nozzle diameter error less than 0.02 mm, provide you a accurate and smooth extrusion
  • Compatibility: these 3D printer nozzles compatible with MK8 hotend for Creality 3D printers, such as Ender-2/ Ender-3/ Ender-3 pro/ Ender-5, also compatible with Creality CR-10 all-metal hotend, Prusa i3, Anet A8, Reprap, etc.
  • What you get: package comes with 5 pieces of black MK8 nozzles, the size is 0.4 mm, sufficient quantity to facilitate your timely replacement, achieving quality printing
No. 4
QIDI TECH 3D Printer, X-Pro 3D Printer with WiFi Function, Dual Extruder, High Precision Double Color Printing with ABS,PLA,TPU Filament,9.1x5.9x5.9 Inch
  • ★★★★★【Friendly Reminder: There is one spool of red color PLA, one spool of white color ABS filament, please check the filament before printing and use the correct settings to print.】QIDI TECH 3D printer, equipped with the latest dual extrusion technology, occupied the overall leading position in education, engineering, design and home/hobby printing.
  • X-Pro 3D Printer Kit features conditional breakpoint printing and upgraded 4.3 inch touch screen, Smarter and easier operation.Mute printing.
  • Durable and high temperature resistance 6mm aviation grade aluminum build platform, can be heated up to 120℃. Removable curved metal plate make it more convenient to remove the model after printing, which is widely appreciated by users.
  • The QIDI TECH 3D Printer with metal platform support rod, which upgraded to 12mm, and also including upgraded parts like motor, main board, and mechanical structure, ensuring more stable printing.
  • R QIDI TECHNOLOGY provide free one year warranty.
No. 5
3D Printer: A Complete 3D Printing Guide
  • Amazon Kindle Edition
  • Randall, Milton Don (Author)
  • English (Publication Language)
  • 91 Pages - 02/15/2022 (Publication Date) - Milton Don Randall Publishing (Publisher)
No. 6
Creality Ender-3 S1 Pro 3D Printer Features 300°C High-Temperature Nozzles Sprite Direct Dual-Gear Extruder CR Touch Automatic Bed Leveling PEI Spring Steel Plate LED Light
  • 🏆【300°C High-temp Nozzle】:The brand new nozzle made of brass can stand up to 300°C printing temperature, and it is compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA, providing more possibilities for creation.
  • 🏆【"Sprite" Full-metal Dual-gear Direct Extruder】:The "Sprite" full-metal dual-gear direct extruder with an extrusion force of 80N ensures smooth feeding when printing with different filaments, especially the flexible TPU.
  • 🏆【CR Touch Automatic Leveling】:Equipped qith CR Touch, the 16-point automatic leveling can complete quickly with compensation for points' printing height on the heat bed. Good effeciency saves much time.
  • 🏆【Spring Steel PEI Magnetic Build Plate】:Ender-3 S1 Pro has used the spring steel PEI magnetic build plate, which has good adhesion to the printed model and enables fast heating up of the heat bed. The build plates is not only durable but also flexible. Once the printing completes, users can remove the printed mdel effortlessly with just a slight bend.
  • 🏆【4.3-Inch Touch Screen & LED Light】:The 4.3-inch touch screen, supporting 9 languages, offers efficient UI interaction and is easy to use. It will dim out automatically for energy-saving if there is no action for 3 minutes. The equipped LED light enables comprehensive light fill, with which users can observe the printing details even in a dark environment.
No. 7
Sovol SV02 3D Printer with All-Metal Dual Extruder, Silent Board TMC2208 Drive, Meanwell Power Supply, Tempered Glass Bed & 4.3 inch Touchscreen, 240 x 280 x 300 mm
  • 【95% Pre-assembled with Upgraded 2 in 1 Out Hotend】 With a full-metal body, stable and durable. 95% preassembled already, just need to install the gantry, filament holder and the touchscreen effortlessly and get ready within 5~10 minutes. Support two-color printing, switch between two filaments when printing, and extrude through a nozzle. Provides high speed and stable print quality. Larger Build volume (mm) 280 x 240 x 300 (one color), 240 x 220 x 300 (two colors).
  • 【External Laser Engraving Module】 Sovol SV01/SV02 3D printer can be used with laser kits (not included) to expand the laser engraving function. Please purchase it according to your needs. Supports engraving with a wide variety of materials like wood, plastic, leather, PVC, paper, resin, etc.
  • 【Silent Motherboard TMC2208 & Meanwell Power Supply】 Works more quietly, provides excellent stability and protection for SV02. Marlin 2.0 firmware and bootloader preinstalled. With safety warning system of Thermal Runaway Protection, against lose control of temperature. A stable and sufficient power supply protects your printer from unexpected voltage peaks. Safer and more reliable.
  • 【4.3 '' Color Touchscreen】 With an intuitive and responsive interface that allows you to change and monitor relevant settings for direct control throughout the printing process.
  • 【More Charactoristics】 Removable glass plate, resume printing function, dual Z-axis design, support Bl-Touch add-on, support TF card and USB online printing. Any questions or issues please feel free to contact us. We will provide technical support for you and reply within 24 hours.
No. 8
Creality Ender-3 S1 Pro 3D Printer Ender-3 S1 Upgrade with 300°C High-Temperature Nozzles PEI Spring Steel Plate LED Light Sprite Direct Dual-Gear Extruder CR Touch Automatic Bed Leveling
  • 🏆【300°C High-temp Nozzle】:The brand new nozzle made of brass can stand up to 300°C printing temperature, and it is compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA, providing more possibilities for creation.
  • 🏆【Spring Steel PEI Magnetic Build Plate】:Ender-3 S1 Pro has used the spring steel PEI magnetic build plate, which has good adhesion to the printed model and enables fast heating up of the heat bed. The build plates is not only durable but also flexible. Once the printing completes, users can remove the printed mdel effortlessly with just a slight bend.
  • 🏆【4.3-Inch Touch Screen & LED Light】:The 4.3-inch touch screen, supporting 9 languages, offers efficient UI interaction and is easy to use. It will dim out automatically for energy-saving if there is no action for 3 minutes. The equipped LED light enables comprehensive light fill, with which users can observe the printing details even in a dark environment.
  • 🏆【"Sprite" Full-metal Dual-gear Direct Extruder】:The "Sprite" full-metal dual-gear direct extruder with an extrusion force of 80N ensures smooth feeding when printing with different filaments, especially the flexible TPU.
  • 🏆【CR Touch Automatic Leveling】:Equipped qith CR Touch, the 16-point automatic leveling can complete quickly with compensation for points' printing height on the heat bed. Good effeciency saves much time.
SaleNo. 9
TENLOG TL-D3 Pro Independent Dual Extruder 3D Printer, Upgrade BMG Extruder,300 Degree High Temperature Nozzle,Silent Mainboard TMC2209 Drive,600W Power Supply,11.8''x11.8''x13.8''
  • 【Independent Dual Extruder Design】Our TL-D3 Pro dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual material/duplication/mirror mode. With dual material printing mode, you can get two color models. Choose duplication or mirror mode, you can get two models of the same color or different colors.
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
  • 【Self-developed Silent Motherboard 】The TL-D3 Pro built-in self-developed silent motherboard tmc2209 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
  • 【Easy to Assemble】It comes with several assembled parts. You can assemble the 3D printer in 3 steps, with its user manual, in about 5 minutes.
  • 【Metal scraper】 when using dual-material mode, the metal scraper is afraid that it will wipe the remaining filament on the nozzle, so there is no need to use a Enable Ooze Shield and a Enable Prime Tower to print the dual-color mode.
No. 10
Diamondback Nozzles – V6 Compatible – Polycrystalline Solid Diamond Tip 3D Printer Nozzles, Improved Extrusion, Any Filament, Long Life, Wear Resistant, Layer Adhesion, USA Made (1.75mm x 0.4mm)
  • HIGH QUALITY: The Diamondback Science team has been developing world-class diamond products for the energy industry for more than 40 years. Members of the team recently developed a proprietary Polycrystalline Diamond (PCD) nozzle to be used in 3D printing that can handle the most challenging applications! Easier to clean and reduces tip clogging, improves layer adhesion, has a solid diamond tip, any filaments, longer life, lowers operating temperature, and delivers unmatched wear resistance!
  • PRECISION PRINT: Our nozzles rely on a solid diamond tip to improve precision 3D printing. The tip is not a diamond coating, but rather a solid diamond substrate made of polycrystalline diamond. Not only is our diamond the hardest material in the world, but it also provides best-in-class thermal conductivity, or heat transfer capability. Easily transfers heat from the hotend through the nozzle and into the filament--ensuring more precision printing and better layer adhesion on every print!
  • ANY FILAMENT: Diamondback relies on a proprietary and patented diamond technology. This breakthrough technology allows 3D printers to print any filament on the same nozzle. A DiamondBack nozzle can easily print standard PLA and ABS filaments AND highly abrasive carbon fiber-embedded filaments without having to worry about changing out the nozzle! Also it allows 3D printing using PLA Copper, Iron, and Carbon Fiber!
  • LONGER LIFE: The Polycrystalline Diamond (PCD) used in every DiamondBack nozzle will significantly extend the overall life of the nozzle. The extreme hardness, wear resistance, and thermal conductivity of this unique material make it an ideal solution for 3D printing. Delivers high thermal conductivity, low coefficient of friction, and high fracture toughness. Extends the tool life of other applications in other industries by 2 to 8 times the life of tungsten carbide and other hard metals!
  • SPECIFICATIONS: It is recommended that DiamondBack Nozzle users follow the operating specifications provided by each 3D printer manufacturer and each filament supplier. DiamondBack Nozzle temperatures should not exceed 300 Celsius.

Last update on 2022-06-22 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment